Searchresult: 21 hits with "Material:Wood"

Labelling, printing and laser cutting

Labelling, printing and laser cutting

Laser cutting - labelling - printing Three machining processes in a single operation Expand the usage areas of the laser system by combining the eurolaser Label and Ink Printer Module options. Label individual parts and subsequently print the label with serial numbers or barcodes. In this way you can prepare for further stages of production in an optimum More details...

POS Material | Laser processing, routing, knife cutting

POS Material | Laser processing, routing, knife cutting

Maximumflexibility for store and fair constructions - High flexibility in daily service due to various additional options - Polished and smooth cutting edges, no rework necessary - No fixing of material necessary due to contactless and forceless processing - Freely selectable contours especially for printed materials due to optical recognition sy More details...

Wooden materials in laser test | laser cutting

Wooden materials in laser test | laser cutting

EGGER OSB panels On behalf of the EGGER Retail Products GmbH, we have tested the OSB panels in our application laboratories. For the test cut, the OSB panels were used in strengths 12 mm, 18 mm and 3 mm. The results show that all strengths can be easily cut with a CO2 laser. Which advantages does laser cutting of OSB panels hold? • No chips, theref More details...

3 in 1 – Laser, router, knife cutter on one system

3 in 1 – Laser, router, knife cutter on one system

3 in 1 Use the best range of tools in parallel to the laser! Use the laser plus two mechanical tools in parallel on one machine. The entire high-quality range of Zünd tools is available for you. Extend your machining and material options without expensive additional investments. This gives you • up to three tools in parallel on one machine • a range More details...

eurolaser event bus printed on MDF | Laser cutting

eurolaser event bus printed on MDF | Laser cutting

Task: A pre-printed MDF plate of the office equipment range is to be cut by laser. Fiducial marks were printed for detecting the position of the material on the cutting table. The alignment of the cutting contour for printing is to be carried out using camera recognition. Technical data: Material: MDF Material thickness: 3.2 mm Verwendung: Office e More details...

MDF furniture and trade fair construction | Laser cutting

MDF furniture and trade fair construction | Laser cutting

Sawing is yesterday's news! The mechanical processing of wood is normally connected with time-intensive pre-work or re-working. The material has to be fastened, tools sharpened and the work area swept of shavings and dust. What benefits do lasers provide when processing wood? Using our illustrative example, we show you how unusual seating units can be mad More details...

Musical instruments | Laser cutting

Musical instruments | Laser cutting

You will hit the right notes with eurolaser The laser cutting system is being used more and more frequently for low priced products and also at the top end of the market. It doesn't matter whether the mass production of guitar soundboards is involved or custom made inlaid work to decorate the fretboard, the laser tool outperforms traditional processing me More details...

Model house made of 6 materials | Laser and knife cutting

Model house made of 6 materials | Laser and knife cutting

The flexible all-in-one solution Laser, with its high level of flexibility and fast processing capacity, is the perfect tool for producing architectural and miniature models. The first prototype is ready just as quickly as an exemplar from the finished series. What is more, the architect’s or designer’s CAD files can be exported to the laser system direct More details...

Exclusive loud speaker boxes | Laser cutting

Exclusive loud speaker boxes | Laser cutting

Laser technology for the perfect combination of sound and design A very interesting laser application is the manufacture of premium loud speaker boxes. In our sample we used 18 mm multiplex boards that were cut to shape with 600 watts on the M-1600 laser system. Each box consists of 35 single pieces which are put together in layers to form the body. Th More details...

High-quality wood parquet inlays | Laser cutting

High-quality wood parquet inlays | Laser cutting

Stylish floor covering The natural material wood is still in vogue and always ensures a cosy and timeless ambiance. One reason why wood parquet is very much in demand as a floor covering even today. Inlay work is very popular for giving the parquet an individual design. But it is not only in historic buildings that you find this centuries-old technique. S More details...

Trend-setting mobile phone cases | Laser engraving

Trend-setting mobile phone cases | Laser engraving

Individually engraved bamboo According to a recent survey several billion mobile phones have been sold worldwide to date. This represents a huge potential with excellent growth prospects. The trend towards high-quality, multifunctional smartphones with touch screens is still on the rise, with the practical function of telephony playing only a minor rol More details...

Model aircraft made of balsa wood | Laser cutting

Model aircraft made of balsa wood | Laser cutting

Light as a feather Today balsa wood is one of the most widely-used materials in the model making branch. Due to its light weight and high degree of mechanical strength, it is ideally suited for model aircrafts in particular. But there are a whole series of less well-known technical applications that also make use of these material properties. Benefits  More details...

Coat racks out of 12 mm Multiplex | Laser cutting

Coat racks out of 12 mm Multiplex | Laser cutting

Wardrobe for special ambience Always functional – but also quite different. The special argument is the individual design capability and therefore the design of these coat racks. Made from 12 mm thick Multiplex, they are the combination of a high degree of stability and low-cost materials. As well as being a storage facility for jackets and coats, the More details...

Attractive Christmas decorations | Laser cutting and marking

Attractive Christmas decorations | Laser cutting and marking

Acrylic, wood - there are no bounds to the imagination Year after year millions of Christmas trees are hung with Christmas decorations the world over. There is an enormous choice of decorations ranging from beautiful wooden angels, elegant stars for the top of the Christmas tree and on right through to glass baubles. In addition to the standard look to More details...

Zünd tools for mechanical processing | Routing and knife cutting

Zünd tools for mechanical processing | Routing and knife cutting

Enhanced flexibility on a single machine - a milling head, the ideal supplement to laser For some materials it is better to choose a milling cutter rather than laser technology. Examples of such materials are composites, some types of wood and sandwich materials such as Dibond. However, not many users know that the laser systems from eurolaser can be  More details...

Laser cutter for model making | Laser cutting

Laser cutter for model making | Laser cutting

The world in miniature format The timber framework front of this small riding stable is made of plywood, giving the model railway a particularly realistic appearance. Other typical materials used in model making: • Polystyrene • Cardboard • Plywood • MDF • Balsa wood • Acrylic Toy models just do not have the right effect unless they give a convinci More details...

Wood handcraft | Laser cutting

Wood handcraft | Laser cutting

The video shows how cutting and engraving of miniature models is done with the eurolaser system. Toy models just do not have the right effect unless they give a convincing image of the real world. The models must be made as realistically as possible in order to bring the miniature world to life and this is where accuracy in detail plays a vital role. Bot More details...

Wood veneer inlays | Laser cutting

Wood veneer inlays | Laser cutting

Create your very own living room The processing of wood veneer for the manufacture of individual doors is an excellent example of the efficient use of laser technology for interior design. The exceptionally fine cuts allow exact fitting of the inlays as well as wonderfully filigree contours. The material remains absolutely flat and even during processi More details...

Printed MDF base plates for trays | Laser cutting

Printed MDF base plates for trays | Laser cutting

Printed MDF – highly versatile Often invisible to the consumer, MDF boards are used in furniture, shopfitting and exhibition stand construction, and in many small items ranging from toys to high-quality interior decorations. Laser technology is becoming increasingly important in the machining of MDF boards up to about 10 mm thickness. The wood vaporise More details...

Candle arch made of plywood | Laser cutting

Candle arch made of plywood | Laser cutting

The video shows cutting of plywood with the CO2 laser system from eurolaser. Plywood is perfectly made for being cut and engraved with a laser system. During the process, the surface remains crack-free and do not show signs of bruise by clamping. The Laser cuts extremely fine contours. The result of the process shows smooth und precise cutting edges. Apa More details...

Dieboard production | Laser cutting and marking

Dieboard production | Laser cutting and marking

The video shows cutting, engraving and marking of dieboards. Dieboard production in the common way is often combined with a lot of dust and chipping. But not with eurolaser systems. No dust, no chipping - and the highest precision is already included. • One system for perfect laser cutting of dieboards and ejection rubbers, samplemaking, drawing and marki More details...