Searchresult: 28 hits with "Application: Advertising"
Twin Table System with permanent vacuum
The Twin Table System increases your profitability. While one side of the material carrier is being cut, the other side can be reloaded. In addition, a permanent vacuum under the material ensures opti More details...
POS+ professional - Optimal processing of printed materials
The POSITION+professional camera recognition system captures the entire work area using an area scan. This speeds up the process time by up to 90%. By reading QR/barcodes, various application jobs inc More details...
Advantages of non-contact laser processing
Your material is cut and engraved without contact, so that there is no breakage, material distortion or crushing. Placement is extremely simple and there is no need to fix the workpieces. Benefit from More details...
Automated processing with unique application possibilities. NEW!
Save time and automate your processing! 1. scan the QR or barcode 2. associated job file is opened 3. suitable parameters are retrieved 4. process starts fully automatically The new POSITIONplus prof More details...
Contour detection of already printed workpieces. NEW!
With POSITIONplus professional you can scan printed workpieces or materials with existing contours and have the cutting data automatically created and positioned. In this way, you can cut with contour More details...
Over 90% time saving - POSITION PLUS PROFESSIONAL
The area scan detects all fiducial marks and printed contours by scanning the entire work area once. The time for scanning fiducial marks is significantly reduced. The contour detection can signific More details...
Neoprene | Laser cutting and engraving
Many people are familiar with Neoprene from water sports clothing, the thermally insulating wetsuit. However, the material is actually called chloroprene rubber or polychloroprene and has many uses. I More details...
Marking Modules - Labeling, marking, printing - eurolaser
With the eurolaser marking modules, you can cut and mark your materials in a single operation. This makes it quick and easy to prepare further processing steps, such as the sewing process for textile More details...
Laser cutting test of technical fabrics by PONGS - eurolaser
eurolaser offers CO2 laser cutter especially for textiles Large format laser systems are ideally suitable for cutting of textiles. Today, modern fabrics, spacer fabrics, fleece and needle felt, as we More details...
Roll change on a 3XL-3200
Roll change on a 3XL-3200.
Laser cutting of Mimaki printed fabrics - sublimation ink in laser test
When producing printed textiles, it is important to have contour-accurate cuts without affecting the print. In cooperation with Mimaki Germany, we tested textile prints for processing with our laser s More details...
Laser cutting systems for viscose
Our laser systems are ideal for cutting viscose and other textiles. Contact-free laser processing is especially useful for delicate details. Our laser test showed that the fabric can be processed with More details...
Laser cutting in the soft signage industry
Our laser systems are ideal for cutting and processing large format textiles in the soft signage industry. Contact-free laser cutting not only works absolutely precise for filigree and edge-free detai More details...
Laser cutting of polyester fabrics by bergertextiles - Technical textiles in laser test
eurolaser has tested different polyester-based fabrics by bergertextiles for their laser cuttability with the result: excellently suitable for laser cutting! We have tested the different polyester More details...
JobIDENT - eurolaser software for automation of the machining process
LaserScout JOBIDENT enables the assignment of different application jobs by the reading out of the existing QR code. The job file identified is uploaded in the user interface automatically and the pro More details...
Virtual Customer Visit - eurolaser demo
NEW: VIRTUAL DEMOS You want to further advance your business? For everyone interested in the possibilities of laser application, we offer free virtual demos and sampling. We tailor every virtual custo More details...
Laser cutting of fire-resistant coated Cordura fabric - DeliFlame by DELCOTEX
Deliflame FR combines the properties of Cordura® with a flame-resistant coating. Therefore, it is a very hard-wearing material that retains its flame-resistant properties even after several times of w More details...
Laser cutting of PALStex by Tacticaltrim - Laserschneiden von PALStex von Tacticaltrim
PALStex® is a special form of laminate fabric that has Cordura® at its base. The fabric meets the NATO-STANAG 4370 standards for restistance to environmental influences and use in all climates. This r More details...
Laser cutting of Cordura -fabric - Delinova150 by Delcotex
Cordura® is based on a woven polyamide fiber and has special properties. It has a very high stability and tear resistance and even has a stab and bullet resistant effect. Delcotex uses the Cordura® More details...
Laser cutting of recycled Polyester-fabric - Delinova ECO 75 by Delcotex
Delcotex stands for textile solutions ‚made in Germany‘. Over 300 years of experience lead to unusual and innovative results. Delinova 75 ECO is a good example of this. The thin textile consists lar More details...
Printed textiles | laser cutting
Perfect cut with laser and optimized preparation for further processing It is a well-known fact that the systems from eurolaser have a clear advantage – especially where processing from the bale is c More details...
Spectacle case made of plywood | Laser cutting
Exclusive designer spectacle case made of wood Today we use our product example to show you how you can make a rigid plywood board pliable by means of laser cutting. The delicate material becomes so More details...
Machining of textiles and fabrics | Laser cutting
eurolaser offers CO2 laser cutter especially for textiles Large format laser systems are ideally suitable for cutting of textiles. Today, modern fabrics, spacer fabrics, fleece and needle felt, as we More details...
tesa® ACXplus High Resistance | Laser cutting test
tesa ® and eurolaser Four product groups of tesa ® ACXplus have been tested for their suitability for laser cutting even before their market launch in a close collaboration between tesa ® and eurolas More details...
Parachute silk made of polyamide | Laser cutting
Cut with laser precision Light, virtually airtight and colourful – typical properties of parachute silk. Nowadays these synthetic tissues which are made of polyamide fibres as well as Aramide and Dyn More details...
Printed polyester fabrics | Laser cutting
Textile Production - Printing - Finishing The optical recognition system allows the exact cut along the pressure contours. The CCD camera is installed directly in the processing head and plots the ma More details...
Velcro material | Laser cutting
Exact cutting of polyester with CO2 laser Velcro is the ideal alternative when it comes to fixing something quickly and then opening it again. The last few years have seen this material being used in More details...
Fleece finishing | Laser engraving
Haptics thanks to laser embossing This technology is particularly advantageous for discreet lettering as the logos, images, letters etc. appear tone-in-tone on the engraved material. That is why colo More details...
