Searchresult: 27 hits with "Material: Certified-materials"

Grip tapes from Jessup in the laser test - eurolaser

Grip tapes from Jessup in the laser test - eurolaser

eurolaser took a closer look at different variants of Jessup Safety Load® and Jessup Safety Track®. The material was tested in the in-house application laboratory with regard to its properties during  More details...

Laser cutting test of technical fabrics by PONGS - eurolaser

Laser cutting test of technical fabrics by PONGS - eurolaser

eurolaser offers CO2 laser cutter especially for textiles Large format laser systems are ideally suitable for cutting of textiles. Today, modern fabrics, spacer fabrics, fleece and needle felt, as we More details...

Laser cutting of Dumico Micanite - Artificial Mica in laser test

Laser cutting of Dumico Micanite - Artificial Mica in laser test

Dumico specializes in the production of micanite, so-called artificial mica, which is composed of about 90% natural mica and 10% binder. We have tested the variants muscovite micanite and phlogopite m More details...

Laser cutting of Avery Dennison Organoid Natural Surfaces - adhesive films in laser test

Laser cutting of Avery Dennison Organoid Natural Surfaces - adhesive films in laser test

Organoid Natural Surfaces is a product line from Avery Dennison Corporation in collaboration with Organoid Technologies GmbH. The polyester carrier film is coated with various trimmings made from regi More details...

Laser cutting of Mimaki printed fabrics - sublimation ink in laser test

Laser cutting of Mimaki printed fabrics - sublimation ink in laser test

When producing printed textiles, it is important to have contour-accurate cuts without affecting the print. In cooperation with Mimaki Germany, we tested textile prints for processing with our laser s More details...

Laser cutting of INVENTEX® protective textiles - PPE textiles in laser test

Laser cutting of INVENTEX® protective textiles - PPE textiles in laser test

INVENTEX® Spezialtextilwerk Funke specializes in the production of protective textiles. INVENTEX® materials are used, for example, by the fire department and police, in extreme sports, but also as w More details...

Laser cutting of polyester fabrics by bergertextiles - Technical textiles in laser test

Laser cutting of polyester fabrics by bergertextiles - Technical textiles in laser test

eurolaser has tested different polyester-based fabrics by bergertextiles for their laser cuttability with the result: excellently suitable for laser cutting! We have tested the different polyester  More details...

Tenowo filter materials in laser test -  Zetafelt & Zetajet

Tenowo filter materials in laser test - Zetafelt & Zetajet

eurolaser has laser tested the nonwoven filter materials from Tenowo with the result: excellently suitable for laser cutting! Tenowo GmbH is one of the world's leading manufacturers of nonwovens. The More details...

Carbon nonwoven material in laser test

Carbon nonwoven material in laser test

Tenowo has been manufacturing new nonwoven material on the basis of recycled carbon fibres since 2010. Particularly in lightweight construction and the automobile industry, there has been an increase  More details...

CRYLUX™ | Laser cutting test

CRYLUX™ | Laser cutting test

CRYLUX™ - Laser cutting of acrylic glass The material was tested in the eurolaser application laboratory in thicknesses of 10 mm, 15 mm and 20 mm. The processing tests indicate that CRYLUX™ can  More details...

PERSPEX® | Laser cutting test

PERSPEX® | Laser cutting test

PERSPEX® CC - Laser cutting of acrylic glass PERSPEX® CC is the ideal material for applications which require excellent optical clarity, surface quality and exceptional thickness tolerance. euro More details...

tesa® ACXplus High Adhesion | Laser cutting test

tesa® ACXplus High Adhesion | Laser cutting test

tesa ® and eurolaser Four product groups of tesa ® ACXplus have been tested for their suitability for laser cutting even before their market launch in a close collaboration between tesa ® and eurolas More details...

tesa® ACXplus High Resistance | Laser cutting test

tesa® ACXplus High Resistance | Laser cutting test

tesa ® and eurolaser Four product groups of tesa ® ACXplus have been tested for their suitability for laser cutting even before their market launch in a close collaboration between tesa ® and eurolas More details...

tesa® ACXplus Black Line | Laser cutting test

tesa® ACXplus Black Line | Laser cutting test

tesa ® and eurolaser Four product groups of tesa ® ACXplus have been tested for their suitability for laser cutting even before their market launch in a close collaboration between tesa ® and eurolas More details...

Tepex® dynalite - composites - organic sheets  | Laser cutting test

Tepex® dynalite - composites - organic sheets | Laser cutting test

High-performance composites  Maximum strength and particularly high stiffness are the key properties of Tepex® dynalite. The continuous fibre reinforced high-performance composite combines these More details...

Kimoto PET films | Laser cutting test

Kimoto PET films | Laser cutting test

Industrial solutions for display screen protection, light diffusion, film keypads Kimoto is a world leader in the manufacture of coated plastic films for technical applications. Its products are used More details...

Wooden materials | laser cutting test

Wooden materials | laser cutting test

EGGER OSB panels On behalf of the EGGER Retail Products GmbH, we have tested the OSB panels in our application laboratories. For the test cut, the OSB panels were used in strengths 12 mm, 18 mm and 3 More details...

Platilon® | Laser cutting test

Platilon® | Laser cutting test

Polyurethane film Platilon® Under the brand name Platilon®, Covestro markets thermoplastic films made from aromatic or aliphatic polyurethane. Due to the excellent results during the cutting tests,  More details...

KömaLite® | Laser cutting test

KömaLite® | Laser cutting test

KömaLite® - polypropylene honeycomb panel On behalf of the profine GmbH Kömmerling Kunststoffe, we have tested the polypropylene panels in our application laboratories. For the test cut, KömaLite was More details...

Makrofol® | Lasertest

Makrofol® | Lasertest

Polycarbonate film Makrofol® DE Under the brand name Makrofol®, Covestro markets thermoplastic polycarbonate film worldwide. It is available as transparent, translucent and covered version. The graph More details...

LUMEX® | Laser cutting test

LUMEX® | Laser cutting test

Impact-resistant and suitable for foodstuff The brand LUMEX® stands for transparent and translucent materials from 3A Composites. Two kinds of LUMEX® are available. LUMEX® A is a high-quality A-PET ( More details...

Polyester fabrics of G.O.F. | Laser cutting test

Polyester fabrics of G.O.F. | Laser cutting test

Textile Production - Printing - Finishing eurolaser is constantly looking for possibilities to further develop the laser systems in a customer-oriented way.  It should come as no surprise that t More details...

Polyester film printed by Canon Océ Arizona | Laser cutting test

Polyester film printed by Canon Océ Arizona | Laser cutting test

Print & Cut - No damage to the print during laser cutting In this test, we want to prove that digital printing is also suitable for industrial production and the printed films can be cut well by  More details...

Acrylic printed by Canon Océ Arizona | Laser cutting test

Acrylic printed by Canon Océ Arizona | Laser cutting test

Print & Cut - No damage to the print during laser cutting We were able to achieve all our aims in our test. The cut edge shows no smoke residue meaning that the white back remains faultless. The  More details...

ETTLIN lux® - Light technical fabric | Laser cutting test

ETTLIN lux® - Light technical fabric | Laser cutting test

The perfect symbiosis of functionality and design ETTLIN lux ® effect fabrics can be cut with standard scissors and knives. Ultrasonic welding and sewing are also commonly used processing methods. In More details...

SMART-X® lightweight boards | Laser cutting test

SMART-X® lightweight boards | Laser cutting test

Visual communications Processing tests in the eurolaser applications lab showed that SMART-X ® can be cut really superbly with CO2 laser cutting systems. The precise and automatic processing opens up More details...

tesa® ACXplus High Transperancy | Laser cutting test

tesa® ACXplus High Transperancy | Laser cutting test

tesa ® and eurolaser Four product groups of tesa ® ACXplus have been tested for their suitability for laser cutting even before their market launch in a close collaboration between tesa ® and eurolas More details...

Cookie settings

Settings for your privacy

This website uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.