Searchresult: 43 hits with "Application: Automotive"
Twin Table System with permanent vacuum
The Twin Table System increases your profitability. While one side of the material carrier is being cut, the other side can be reloaded. In addition, a permanent vacuum under the material ensures opti More details...
POS+ professional - Optimal processing of printed materials
The POSITION+professional camera recognition system captures the entire work area using an area scan. This speeds up the process time by up to 90%. By reading QR/barcodes, various application jobs inc More details...
Advantages of non-contact laser processing
Your material is cut and engraved without contact, so that there is no breakage, material distortion or crushing. Placement is extremely simple and there is no need to fix the workpieces. Benefit from More details...
Automated processing with unique application possibilities. NEW!
Save time and automate your processing! 1. scan the QR or barcode 2. associated job file is opened 3. suitable parameters are retrieved 4. process starts fully automatically The new POSITIONplus prof More details...
Contour detection of already printed workpieces. NEW!
With POSITIONplus professional you can scan printed workpieces or materials with existing contours and have the cutting data automatically created and positioned. In this way, you can cut with contour More details...
Over 90% time saving - POSITION PLUS PROFESSIONAL
The area scan detects all fiducial marks and printed contours by scanning the entire work area once. The time for scanning fiducial marks is significantly reduced. The contour detection can signific More details...
Neoprene | Laser cutting and engraving
Many people are familiar with Neoprene from water sports clothing, the thermally insulating wetsuit. However, the material is actually called chloroprene rubber or polychloroprene and has many uses. I More details...
Guide Rail System | Automation and Options
Processing of several textile rolls in parallel With our guide rail system for textile processing, several textile webs can be processed simultaneously on one laser system. Especially with narrow roll More details...
Grip tapes from Jessup in the laser test - eurolaser
eurolaser took a closer look at different variants of Jessup Safety Load® and Jessup Safety Track®. The material was tested in the in-house application laboratory with regard to its properties during More details...
Marking Modules - Labeling, marking, printing - eurolaser
With the eurolaser marking modules, you can cut and mark your materials in a single operation. This makes it quick and easy to prepare further processing steps, such as the sewing process for textile More details...
Laser cutting of Dumico Micanite - Artificial Mica in laser test
Dumico specializes in the production of micanite, so-called artificial mica, which is composed of about 90% natural mica and 10% binder. We have tested the variants muscovite micanite and phlogopite m More details...
Laser cutting of ORABOND® - Adhesive tape by Orafol
eurolaser has laser tested the material ORABOND® by Orafol with the result: excellently suitable for laser cutting! ORABOND® is a high-performance adhesive tape consisting of an acrylic pressure se More details...
Laser cutting of industrial adhesive tapes
CO2 laser cutters specially developed for high-performance adhesive tapes Industrial tapes are the ideal choice for high-performance industrial applications. However, the material presents ist process More details...
JobIDENT - eurolaser software for automation of the machining process
LaserScout JOBIDENT enables the assignment of different application jobs by the reading out of the existing QR code. The job file identified is uploaded in the user interface automatically and the pro More details...
Seat cushion made of spacer fabrics | Laser cutting
Cutting spacer fabrics without crushing The special feature of spacer fabrics is the material thickness, the third dimension of this textile. Spacer threads keep two textile surfaces at a distance fr More details...
Virtual Customer Visit - eurolaser demo
NEW: VIRTUAL DEMOS You want to further advance your business? For everyone interested in the possibilities of laser application, we offer free virtual demos and sampling. We tailor every virtual custo More details...
Laser cutting of thermoplastic prepregs | Laserschneiden von thermoplastischen Prepregs
Compared to conventional materials, thermoplastic prepregs can save a lot of weight and costs while optimising the stability of components. However, the high degree of stability of the fabric has also More details...
Laser cutting of fiberflass babrics
Large format laser systems are optimally suitable for the cutting of textiles made of fiberglass. Especially the contactless processing through the laser beam and the therewith related non-deforming l More details...
Laser cutting of balsa core material
The processing tests at eurolaser demonstrated that BALTEK® SB.100 can be cut and engraved perfectly with our CO? laser systems. Outstanding results can be achieved with our laser systems even with a More details...
Carbon nonwoven material in laser test
Tenowo has been manufacturing new nonwoven material on the basis of recycled carbon fibres since 2010. Particularly in lightweight construction and the automobile industry, there has been an increase More details...
Efficient processing of plastic films | laser cutting
eurolaser offers you especially developed CO2 laser cutter for plastic films The cutting of foils with CO2 laser systems is characterised by high precision and flexibility. Laser cutter are mostly fa More details...
Printed textiles | laser cutting
Perfect cut with laser and optimized preparation for further processing It is a well-known fact that the systems from eurolaser have a clear advantage – especially where processing from the bale is c More details...
Acrylonitrile butadiene styrene (ABS) | Laser cutting and routing
The CO2 laser systems from eurolaser are ideally suited for the processing of acrylonitrile butadiene styrene CO2 laser systems are an excellent tool for cutting and engraving numerous plastics with More details...
Machining of textiles and fabrics | Laser cutting
eurolaser offers CO2 laser cutter especially for textiles Large format laser systems are ideally suitable for cutting of textiles. Today, modern fabrics, spacer fabrics, fleece and needle felt, as we More details...
tesa® ACXplus High Adhesion | Laser cutting test
tesa ® and eurolaser Four product groups of tesa ® ACXplus have been tested for their suitability for laser cutting even before their market launch in a close collaboration between tesa ® and eurolas More details...
tesa® ACXplus High Resistance | Laser cutting test
tesa ® and eurolaser Four product groups of tesa ® ACXplus have been tested for their suitability for laser cutting even before their market launch in a close collaboration between tesa ® and eurolas More details...
tesa® ACXplus Black Line | Laser cutting test
tesa ® and eurolaser Four product groups of tesa ® ACXplus have been tested for their suitability for laser cutting even before their market launch in a close collaboration between tesa ® and eurolas More details...
Foam materials | Laser cutting and engraving
Foams in the industry The industrial usage of foams has developed a lot in the last few years. Today’s foam market consists of a multitude of different materials for a wide range of applications. For More details...
Ink Printer Module and Label Module | Automation and Options
Laser cutting - labelling - printing Three machining processes in a single operation. Expand the usage areas of the laser system by combining the eurolaser Label and Ink Printer Module options. Labe More details...
Tepex® dynalite - composites - organic sheets | Laser cutting test
High-performance composites Maximum strength and particularly high stiffness are the key properties of Tepex® dynalite. The continuous fibre reinforced high-performance composite combines these More details...
Veneer | Laser cutting
Filigree cuts This video shows veneer being cut with laser using a CO2 laser cutting system from eurolaser. The laser cuts with maxim precision when compared to cutting with a saw. There is no More details...
PETG processing with two tools | Laser cutting and routing
Combine the advantages of laser cutting and milling PETG sheets are similar in appearance to acrylic glass but they have different properties. PETG, for example, is a lot more stable or resistant, al More details...
Makrofol® | Lasertest
Polycarbonate film Makrofol® DE Under the brand name Makrofol®, Covestro markets thermoplastic polycarbonate film worldwide. It is available as transparent, translucent and covered version. The graph More details...
Polyester film printed by Canon Océ Arizona | Laser cutting test
Print & Cut - No damage to the print during laser cutting In this test, we want to prove that digital printing is also suitable for industrial production and the printed films can be cut well by More details...
ETTLIN lux® - Light technical fabric | Laser cutting test
The perfect symbiosis of functionality and design ETTLIN lux ® effect fabrics can be cut with standard scissors and knives. Ultrasonic welding and sewing are also commonly used processing methods. In More details...
Filter fleece of polyester | Laser cutting
Modern filter technology through modern manufacture One of the uses of filter fleece is the separation of solids from liquids in wet filtration. Good filter technology is critical to the outcome of b More details...
Printed polyester fabrics | Laser cutting
Textile Production - Printing - Finishing The optical recognition system allows the exact cut along the pressure contours. The CCD camera is installed directly in the processing head and plots the ma More details...
tesa® ACXplus High Transperancy | Laser cutting test
tesa ® and eurolaser Four product groups of tesa ® ACXplus have been tested for their suitability for laser cutting even before their market launch in a close collaboration between tesa ® and eurolas More details...
Heat-resistant glass fibres | Laser cutting
Application: Motor sports and tuning In our example, we tested both glass-fibre fabric and approx. 8 mm thick glass-fibre fleece in our CO2 laser systems. The cut contour corresponds to a typical for More details...
Velcro material | Laser cutting
Exact cutting of polyester with CO2 laser Velcro is the ideal alternative when it comes to fixing something quickly and then opening it again. The last few years have seen this material being used in More details...
Membrane switches | Laser cutting
eurolaser offers CO2 laser cutters developed especially for plastic foils Membrane switches must always remain operational under special conditions. Durability, soiling and water resistance as well a More details...
Automated sprue removal | Laser cutting
Reduce costs and increase quality On the one hand, automation means reducing the use of personnel and increasing manufacturing quality. On the other, more economic production processes require reliab More details...
Fully-automatic production line | Laser cutting
Fully-automatic processing of technical textiles This video shows the fully-automatic processing of technical textiles for the automotive branch. The laser system is fully integrated in the productio More details...
