Searchresult: 140 hits with "Bearbeitungsart: Laserschneiden"
CRYLON® HC Coated acrylic | Laser cutting test
Coated acrylic from 3A Composites successfully certified in laser test The materials PERSPEX® XT HC, CRYLON® HC and AKRYLON® HC from 3A Composites are extruded acrylic sheets with a coating on one or More details...
Video-Interview: Twin Table System design process
The introduction of our new Twin Table System is no longer a secret. But what makes this system so special? Why was it developed and what were the challenges in the design process? Our experts from th More details...
Twin Table System with permanent vacuum
The Twin Table System increases your profitability. While one side of the material carrier is being cut, the other side can be reloaded. In addition, a permanent vacuum under the material ensures opti More details...
POS+ professional - Optimal processing of printed materials
The POSITION+professional camera recognition system captures the entire work area using an area scan. This speeds up the process time by up to 90%. By reading QR/barcodes, various application jobs inc More details...
Advantages of non-contact laser processing
Your material is cut and engraved without contact, so that there is no breakage, material distortion or crushing. Placement is extremely simple and there is no need to fix the workpieces. Benefit from More details...
Save time and increase your productivity!
Experience the future of laser technology with eurolaser and discover the many possibilities offered by the "Position Plus Professional" option. Thanks to optical recognition technology, the system au More details...
Automated processing with unique application possibilities. NEW!
Save time and automate your processing! 1. scan the QR or barcode 2. associated job file is opened 3. suitable parameters are retrieved 4. process starts fully automatically The new POSITIONplus prof More details...
Contour detection of already printed workpieces. NEW!
With POSITIONplus professional you can scan printed workpieces or materials with existing contours and have the cutting data automatically created and positioned. In this way, you can cut with contour More details...
Over 90% time saving - POSITION PLUS PROFESSIONAL
The area scan detects all fiducial marks and printed contours by scanning the entire work area once. The time for scanning fiducial marks is significantly reduced. The contour detection can signific More details...
DATABASE – software module for central parameter access
Workflow optimization through central parameter access. Benefit from decades of application experience and use DATABASE as a central database with cutting parameters. You optimize your workflow by ac More details...
Climbing skin for skis | Laser cutting
Non-contact laser cutting is very well suited for cutting synthetic ski skins or climbing skins. Advantages of the laser when cutting ski skins: No fraying of the cut edge Sealing of the cut edge More details...
Neoprene | Laser cutting and engraving
Many people are familiar with Neoprene from water sports clothing, the thermally insulating wetsuit. However, the material is actually called chloroprene rubber or polychloroprene and has many uses. I More details...
Guide Rail System | Automation and Options
Processing of several textile rolls in parallel With our guide rail system for textile processing, several textile webs can be processed simultaneously on one laser system. Especially with narrow roll More details...
Grip tapes from Jessup in the laser test - eurolaser
eurolaser took a closer look at different variants of Jessup Safety Load® and Jessup Safety Track®. The material was tested in the in-house application laboratory with regard to its properties during More details...
Marking Modules - Labeling, marking, printing - eurolaser
With the eurolaser marking modules, you can cut and mark your materials in a single operation. This makes it quick and easy to prepare further processing steps, such as the sewing process for textile More details...
Laser cutting test of technical fabrics by PONGS - eurolaser
eurolaser offers CO2 laser cutter especially for textiles Large format laser systems are ideally suitable for cutting of textiles. Today, modern fabrics, spacer fabrics, fleece and needle felt, as we More details...
3 IN 1 - Use the best range of tools in parallel to the laser!
Use the laser plus two mechanical tools in parallel on one machine. The entire high-quality range of Zünd tools is available for you. Extend your machining and material options without expensive add More details...
eurolaser Smartfeed - Optimum material feed for single work step cutting
The feed cycle is controlled by the software in such a way that cutting of the individual parts is always carried out in a single work step. The software recognizes if some of the individual parts d More details...
Laser cutting of Propex CURV® - Self-inforced thermoplastic prepregs
Propex Furnishing Solutions (PFS) has made a name for itself in particular with its CURV® brand product. The 100 percent thermoplastic semi-finished material is produced in a multi-stage process from More details...
Machines, markets, materials - Insight into modern contract manufacturing w. Visolaser
Heiner Guevarra, the CEO of Visolaser is a laser fan from the very beginning. Convinced by the non-contact cutting process, the company uses the entire range of eurolaser products. In the interview, More details...
Laser cutting of Dumico Micanite - Artificial Mica in laser test
Dumico specializes in the production of micanite, so-called artificial mica, which is composed of about 90% natural mica and 10% binder. We have tested the variants muscovite micanite and phlogopite m More details...
1 System - Numerous applications
Take a look at the tool variety of eurolaser systems.
Laser cutting of Avery Dennison Organoid Natural Surfaces - adhesive films in laser test
Organoid Natural Surfaces is a product line from Avery Dennison Corporation in collaboration with Organoid Technologies GmbH. The polyester carrier film is coated with various trimmings made from regi More details...
Laser cutting of Mimaki printed fabrics - sublimation ink in laser test
When producing printed textiles, it is important to have contour-accurate cuts without affecting the print. In cooperation with Mimaki Germany, we tested textile prints for processing with our laser s More details...
Laser cutting of fine and coarse dust filters from RAASCH Luftfilter
The company Raasch Luftfilter specializes in the production of filter materials for particle filtration from the air. The own brand “Raasch-Filter” is in demand in the field of filter technology as a More details...
Cutting of printed acrylic - Precisely and true-to-contour
Printing creates completely new challenges for acrylic processors. Gentle processing must take place in which neither the material itself nor the ink is damaged. We show you the stunning results you c More details...
Laser cutting of INVENTEX® protective textiles - PPE textiles in laser test
INVENTEX® Spezialtextilwerk Funke specializes in the production of protective textiles. INVENTEX® materials are used, for example, by the fire department and police, in extreme sports, but also as w More details...
Laser cutting of thick acrylic - Our cutting results for PMMA from 20 mm thickness
eurolaser systems are ideally suited for cutting thick acrylic of 20+ mm thickness. What should be considered when cutting thick acrylic? https://www.eurolaser.com/customer-service/faq/what-should-be More details...
Laser cutting of KROMA® & STUDIOBOARD® - Cardboard materials by KOHLSCHEIN
eurolaser has laser tested the cardboard materials KROMA® and STUDIOBOARD® by KOHLSCHEIN with the result: excellently suitable for laser cutting! We are proud to have worked so closely with Kohlschei More details...
Laser cutting of PLEXIGLAS® proTerra - Recycled acrylic by Röhm
eurolaser has laser tested the material PLEXIGLAS® proTerra by Röhm with the result: excellently suitable for laser cutting! PLEXIGLAS® proTerra consists of 90% reused acylic glass and is a more sust More details...
Laser cutting systems for viscose
Our laser systems are ideal for cutting viscose and other textiles. Contact-free laser processing is especially useful for delicate details. Our laser test showed that the fabric can be processed with More details...
Laser cutting in the soft signage industry
Our laser systems are ideal for cutting and processing large format textiles in the soft signage industry. Contact-free laser cutting not only works absolutely precise for filigree and edge-free detai More details...
Laser cutting of ORABOND® - Adhesive tape by Orafol
eurolaser has laser tested the material ORABOND® by Orafol with the result: excellently suitable for laser cutting! ORABOND® is a high-performance adhesive tape consisting of an acrylic pressure se More details...
Laser cutting of polyester fabrics by bergertextiles - Technical textiles in laser test
eurolaser has tested different polyester-based fabrics by bergertextiles for their laser cuttability with the result: excellently suitable for laser cutting! We have tested the different polyester More details...
Tenowo filter materials in laser test - Zetafelt & Zetajet
eurolaser has laser tested the nonwoven filter materials from Tenowo with the result: excellently suitable for laser cutting! Tenowo GmbH is one of the world's leading manufacturers of nonwovens. The More details...
Laser cutting of industrial adhesive tapes
CO2 laser cutters specially developed for high-performance adhesive tapes Industrial tapes are the ideal choice for high-performance industrial applications. However, the material presents ist process More details...
Laser cutting of self-adhesive decors - easySTYLE by Neschen
eurolaser has tested the self-adhesive decor easySTYLE by Neschen with the result: excellently suitable for laser cutting! easySTYLE is a modern, self-adhesive decor-foil mainly used for interior des More details...
JobIDENT - eurolaser software for automation of the machining process
LaserScout JOBIDENT enables the assignment of different application jobs by the reading out of the existing QR code. The job file identified is uploaded in the user interface automatically and the pro More details...
Seat cushion made of spacer fabrics | Laser cutting
Cutting spacer fabrics without crushing The special feature of spacer fabrics is the material thickness, the third dimension of this textile. Spacer threads keep two textile surfaces at a distance fr More details...
Virtual Customer Visit - eurolaser demo
NEW: VIRTUAL DEMOS You want to further advance your business? For everyone interested in the possibilities of laser application, we offer free virtual demos and sampling. We tailor every virtual custo More details...
Laser cutting of thermoplastic prepregs | Laserschneiden von thermoplastischen Prepregs
Compared to conventional materials, thermoplastic prepregs can save a lot of weight and costs while optimising the stability of components. However, the high degree of stability of the fabric has also More details...
Laser cutting of filtering facepiece respirator
A typical area of application for laser cutting is the cutting of textiles, for example for filtering facepiece respirators. These enclose the mouth and nose. In our video you can see the exact and fu More details...
Laser cutting of fiberflass babrics
Large format laser systems are optimally suitable for the cutting of textiles made of fiberglass. Especially the contactless processing through the laser beam and the therewith related non-deforming l More details...
Laser cutting of fire-resistant coated Cordura fabric - DeliFlame by DELCOTEX
Deliflame FR combines the properties of Cordura® with a flame-resistant coating. Therefore, it is a very hard-wearing material that retains its flame-resistant properties even after several times of w More details...
Laser cutting of PALStex by Tacticaltrim - Laserschneiden von PALStex von Tacticaltrim
PALStex® is a special form of laminate fabric that has Cordura® at its base. The fabric meets the NATO-STANAG 4370 standards for restistance to environmental influences and use in all climates. This r More details...
Laser cutting of recycled Polyester-fabric - Delinova ECO 75 by Delcotex
Delcotex stands for textile solutions ‚made in Germany‘. Over 300 years of experience lead to unusual and innovative results. Delinova 75 ECO is a good example of this. The thin textile consists lar More details...
Machining of wood | Laser cutting and engraving
eurolaser offers CO? laser cutter especially developed for wood panels Our laser systems are ideal for cutting and engraving wood. Contact-free laser processing is particularly notable for delicate d More details...
Personalized giveaway made of acrylic | eurolaser
High quality, individual and with advertising appeal Personalised promotional gifts made from acrylic Impress your customers with a high-quality, personal promotional gift, and create a long-lasting More details...
Laser cutting of home textiles | eurolaser
eurolaser constructs especially configured laser systems for textiles, fabrics, knitted fabrics, fleece, felts and much more. Due to precision, high processing speed and a consistent cutting quality, More details...
Laser cutting of balsa core material
The processing tests at eurolaser demonstrated that BALTEK® SB.100 can be cut and engraved perfectly with our CO? laser systems. Outstanding results can be achieved with our laser systems even with a More details...
Carbon nonwoven material in laser test
Tenowo has been manufacturing new nonwoven material on the basis of recycled carbon fibres since 2010. Particularly in lightweight construction and the automobile industry, there has been an increase More details...
Efficient processing of plastic films | laser cutting
eurolaser offers you especially developed CO2 laser cutter for plastic films The cutting of foils with CO2 laser systems is characterised by high precision and flexibility. Laser cutter are mostly fa More details...
Printed textiles | laser cutting
Perfect cut with laser and optimized preparation for further processing It is a well-known fact that the systems from eurolaser have a clear advantage – especially where processing from the bale is c More details...
Spectacle case made of plywood | Laser cutting
Exclusive designer spectacle case made of wood Today we use our product example to show you how you can make a rigid plywood board pliable by means of laser cutting. The delicate material becomes so More details...
Machining of acrylic | Laser cutting and engraving
The perfect solution for cutting acrylic The CO2 laser is the ideal tool for cutting and engraving acrylic glass (PMMA). Our many years of experience in the manufacture of large-size laser systems en More details...
Acrylonitrile butadiene styrene (ABS) | Laser cutting and routing
The CO2 laser systems from eurolaser are ideally suited for the processing of acrylonitrile butadiene styrene CO2 laser systems are an excellent tool for cutting and engraving numerous plastics with More details...
Shuttle Table System - doubling your productivity | Automation
Shuttle Table System Automatic With the Shuttle table System the efficiency of the eurolaser Systems can be further increased. Loading and unloading can take place during the processing, further the More details...
Ink Printer Module - precise printing | Automation and Options
Precise printing of numbers, logos and barcodes Label your work pieces or stick-on labels directly with the precise Ink Printer Module. The high resolution makes it possible to print fine writing and More details...
Protective vests made of aramid fabric | Laser cutting
Laser cutting of technical textiles Bullet-resistant vests are also known as bullet-proof vests in everyday language. Their task: Distribution of the kinetic energy on the impact of bullets, to preve More details...
Invitation made of acrylic | Laser cutting and engraving
PMMA for creative wedding invitation The invitations to the celebration of the best day of your life can be as individual as the happy couple itself. And if you think of the numerous occasions for wh More details...
CRYLUX™ | Laser cutting test
CRYLUX™ - Laser cutting of acrylic glass The material was tested in the eurolaser application laboratory in thicknesses of 10 mm, 15 mm and 20 mm. The processing tests indicate that CRYLUX™ can More details...
PERSPEX® | Laser cutting test
PERSPEX® CC - Laser cutting of acrylic glass PERSPEX® CC is the ideal material for applications which require excellent optical clarity, surface quality and exceptional thickness tolerance. euro More details...
Machining of textiles and fabrics | Laser cutting
eurolaser offers CO2 laser cutter especially for textiles Large format laser systems are ideally suitable for cutting of textiles. Today, modern fabrics, spacer fabrics, fleece and needle felt, as we More details...
Foil based control elements | Laser cutting
What decisive difference does laser cutting offer? Non-contact! Laser jet processing is contact free. This characteristic alone offers many advantages. Foil remnants cannot adhere to the tool, the ma More details...
Large-sized flags | Laser cutting
eurolaser customer report: Fahnen Gärtner Austria's largest flag manufacturer Fahnen-Gärtner GmbH was founded in Mittersil in Austria in the year 1945. Continuous investments in line with the m More details...
tesa® ACXplus High Adhesion | Laser cutting test
tesa ® and eurolaser Four product groups of tesa ® ACXplus have been tested for their suitability for laser cutting even before their market launch in a close collaboration between tesa ® and eurolas More details...
Printed Acrylic Bus Workflow | Laser cutting and engraving
Printing and cutting of acrylic Production of an acrylic bus as an example of the process and of automation Cutting acrylic with laser has many benefits and can be carried out extremely efficiently t More details...
tesa® ACXplus High Resistance | Laser cutting test
tesa ® and eurolaser Four product groups of tesa ® ACXplus have been tested for their suitability for laser cutting even before their market launch in a close collaboration between tesa ® and eurolas More details...
tesa® ACXplus Black Line | Laser cutting test
tesa ® and eurolaser Four product groups of tesa ® ACXplus have been tested for their suitability for laser cutting even before their market launch in a close collaboration between tesa ® and eurolas More details...
Ventilation ducts made of technical textiles | Laser cutting and marking
Stress-free perforating, cutting and marking Ducts for the distribution of air are normally made of sheet metal. The use of ducts made of technical textiles is now becoming more common in modern air More details...
Cork | Laser cutting and engraving
Laser cutting and engraving of cork CO2 laser systems are well-suited for the cutting and engraving of cork. Characterizing for contactless laser cutting are the filigree details. The sensitive cork More details...
Parachute silk made of polyamide | Laser cutting
Cut with laser precision Light, virtually airtight and colourful – typical properties of parachute silk. Nowadays these synthetic tissues which are made of polyamide fibres as well as Aramide and Dyn More details...
Foam materials | Laser cutting and engraving
Foams in the industry The industrial usage of foams has developed a lot in the last few years. Today’s foam market consists of a multitude of different materials for a wide range of applications. For More details...
Ink Printer Module and Label Module | Automation and Options
Laser cutting - labelling - printing Three machining processes in a single operation. Expand the usage areas of the laser system by combining the eurolaser Label and Ink Printer Module options. Labe More details...
Tepex® dynalite - composites - organic sheets | Laser cutting test
High-performance composites Maximum strength and particularly high stiffness are the key properties of Tepex® dynalite. The continuous fibre reinforced high-performance composite combines these More details...
360° Extraction Technology | Laser systems
Perfect cut edges free of smoke deposits! Using our 360° extraction and material vacuum systems, we can provide the ideal solution for always achieving maximum cut quality and you work safely and eff More details...
Large-format acrylic figures | Laser cutting
Life-size figures from Perspex® for the Lüneburg Museum We used cast 15-mm thick acrylic glass for producing the figures. As some of the figures were to be over 2 m high, we used the XL-1600 or rathe More details...
Veneer | Laser cutting
Filigree cuts This video shows veneer being cut with laser using a CO2 laser cutting system from eurolaser. The laser cuts with maxim precision when compared to cutting with a saw. There is no More details...
Kimoto PET films | Laser cutting test
Industrial solutions for display screen protection, light diffusion, film keypads Kimoto is a world leader in the manufacture of coated plastic films for technical applications. Its products are used More details...
Robot loading | Automation
Economical and flexible automation Time is money – this saying is true today more than ever. There is no way of getting around this maxim, especially where productive manufacturing processes are conc More details...
Barcode Import - process safety and time saving | Software
Process safety and time saving Our software LaserScout enables the use of barcodes with predefined cutting contours and parameters of the material. The completely automatic process flow lowers costs More details...
Filter material | Laser cutting and marking
Because only the best gets through Woven fabrics for filtration are frequently manufactured for technical processes and are often in continuous operation. Whether for the separation of contaminants o More details...
30 mm acrylic gable | Laser cutting and engraving
Acrylic gable Summer 2014 saw the start of the competition ‘Lüneburg’s most beautiful gable’, which revolves around miniature versions of the typical house gables of the hanseatic town of Lüneburg. More details...
6 in 1 | Labelling, Printing, Creasing, Routing, Laser and Knife cutting
Multi-functional solution for flexible finishing Print & Cut Workflow In order to demonstrate the flexibility of eurolaser systems in interaction with digital flatbed printers, we created an ill More details...
Acrylic brochure display stand | Laser cutting
Cut, mounted and radiantly presented Stands and shelves for brochures are classic elements of advertising displays and part of the standard equipment at trade fairs and points of sale. We cut 8 mm th More details...
POS Material | Routing, Knife and Laser cutting
Maximumflexibility for store and fair constructions High flexibility in daily service due to various additional options Polished and smooth cutting edges, no rework necessary No fixing of materia More details...
Sealing material | Laser cutting
Klingersil C-4400 – accurately sealed Seals are usually exposed to highly complex demands. Their functionality therefore depends on a number of parameters. Ever increasing environmental and safety co More details...
Self-adhesive textile | Laser cutting
Exactly printed, cut and always perfectly positioned Promotional media made of textiles have many benefits. They are light, can be printed in brilliant colours and backlit, are flexible in use and su More details...
Wooden materials | laser cutting test
EGGER OSB panels On behalf of the EGGER Retail Products GmbH, we have tested the OSB panels in our application laboratories. For the test cut, the OSB panels were used in strengths 12 mm, 18 mm and 3 More details...
PETG processing with two tools | Laser cutting and routing
Combine the advantages of laser cutting and milling PETG sheets are similar in appearance to acrylic glass but they have different properties. PETG, for example, is a lot more stable or resistant, al More details...
Platilon® | Laser cutting test
Polyurethane film Platilon® Under the brand name Platilon®, Covestro markets thermoplastic films made from aromatic or aliphatic polyurethane. Due to the excellent results during the cutting tests, More details...
Corian® | Laser cutting and engraving
Marble effect object design The high-tech Corian® solid surface is regarded by designers, architects and artists as an outstanding basis for realising their design ideas in the home and commercial se More details...
KömaLite® | Laser cutting test
KömaLite® - polypropylene honeycomb panel On behalf of the profine GmbH Kömmerling Kunststoffe, we have tested the polypropylene panels in our application laboratories. For the test cut, KömaLite was More details...
Makrofol® | Lasertest
Polycarbonate film Makrofol® DE Under the brand name Makrofol®, Covestro markets thermoplastic polycarbonate film worldwide. It is available as transparent, translucent and covered version. The graph More details...
LUMEX® | Laser cutting test
Impact-resistant and suitable for foodstuff The brand LUMEX® stands for transparent and translucent materials from 3A Composites. Two kinds of LUMEX® are available. LUMEX® A is a high-quality A-PET ( More details...
Polyester fabrics of G.O.F. | Laser cutting test
Textile Production - Printing - Finishing eurolaser is constantly looking for possibilities to further develop the laser systems in a customer-oriented way. It should come as no surprise that t More details...
3 in 1 – three tools, one machine| Routing, laser and knife cutting
3 in 1 – Use the best range of tools in parallel to the laser Use the laser plus two mechanical tools in parallel on one machine. The entire high-quality range of Zünd tools is available for you. Ext More details...
3 Materials, 3 Tools, 1 Machine | Routing, laser and knife cutting
3 in 1 - Use the best range of tools in parallel to the laser Use the laser plus two mechanical tools in parallel on one machine. The entire high-quality range of Zünd tools is available for you. Ext More details...
2 in 1 - Acrylic (6 mm) processing| Laser cutting and routing
Combine the advantages of laser and routing tools Due to the parallel use of laser and router on one system, yet unexpected opportunities in material processing came possible. Changing between the to More details...
eurolaser event bus printed on MDF | Laser cutting
Save time with Shuttle Table System and camera In our example, a 3.2 mm strong MDF board (medium density fibreboard) has been printed with the motif of our event bus. The fiducial marks are read by o More details...
2 in 1 - Acrylic (10 mm) processing | Laser cutting and routing
Combine the advantages of laser and routing tools Our example demonstrates the machining of a 10 mm acrylic glass sheet (glass look). The cut outer edge and the inner contours of four bore holes shou More details...
Polyester film printed by Canon Océ Arizona | Laser cutting test
Print & Cut - No damage to the print during laser cutting In this test, we want to prove that digital printing is also suitable for industrial production and the printed films can be cut well by More details...
Acrylic printed by Canon Océ Arizona | Laser cutting test
Print & Cut - No damage to the print during laser cutting We were able to achieve all our aims in our test. The cut edge shows no smoke residue meaning that the white back remains faultless. The More details...
One machine - three tools parallel | Router, knife, laser
Routing, Laser and Knife cutting The basis for our high-performance laser systems are the motion systems of world market leaders Zünd Systemtechnik AG from Switzerland, these systems having been pu More details...
ETTLIN lux® - Light technical fabric | Laser cutting test
The perfect symbiosis of functionality and design ETTLIN lux ® effect fabrics can be cut with standard scissors and knives. Ultrasonic welding and sewing are also commonly used processing methods. In More details...
Event bus - laser cut trade fair equipment | eurolaser
eurolaser's new trade fair booth In an expensive home-production, the double-decker bus was converted into a mobile stage for presenting high-performance laser systems. In designing it, a great deal More details...
Filter fleece of polyester | Laser cutting
Modern filter technology through modern manufacture One of the uses of filter fleece is the separation of solids from liquids in wet filtration. Good filter technology is critical to the outcome of b More details...
Eiffel Tower made of acrylic (PMMA) | Laser cutting
The emblem of France made of acrylic glass - only a laser can do this! Whether as a souvenir or architectural model, miniatures can perfectly be cut with a CO2 laser. The fine laser beam provides exc More details...
MDF furniture and trade fair construction | Laser cutting
Simply lay out and cut The mechanical processing of wood is normally connected with time-intensive pre-work or re-working. The material has to be fastened, tools sharpened and the work area swept of More details...
Plexiglas Resist | Laser cutting and engraving
An alternative to polycarbonate? Every day in our Application Center, different materials are tested for their workability using lasers. This enables the optimum cutting and engraving parameters to b More details...
SMART-X® lightweight boards | Laser cutting test
Visual communications Processing tests in the eurolaser applications lab showed that SMART-X ® can be cut really superbly with CO2 laser cutting systems. The precise and automatic processing opens up More details...
Guitar components | Laser cutting
You will hit the right notes with eurolaser The laser cutting system is being used more and more frequently for low priced products and also at the top end of the market. It doesn't matter whether th More details...
Printed polyester fabrics | Laser cutting
Textile Production - Printing - Finishing The optical recognition system allows the exact cut along the pressure contours. The CCD camera is installed directly in the processing head and plots the ma More details...
tesa® ACXplus High Transperancy | Laser cutting test
tesa ® and eurolaser Four product groups of tesa ® ACXplus have been tested for their suitability for laser cutting even before their market launch in a close collaboration between tesa ® and eurolas More details...
Model house | Laser processing and knife cutting
The flexible all-in-one solution Laser, with its high level of flexibility and fast processing capacity, is the perfect tool for producing architectural and miniature models. The first prototype is r More details...
Plexiglas Resist | Laser cutting and engraving
An alternative to polycarbonate? Every day in our Application Center, different materials are tested for their workability using lasers. This enables the optimum cutting and engraving parameters to b More details...
Loud speaker boxes | Laser cutting
Laser technology for the perfect combination of sound and design A very interesting laser application is the manufacture of premium loud speaker boxes. In our sample we used 18 mm multiplex boards th More details...
Polycarbonate front panels | Laser cutting
High demands on processing quality The ‘white goods’ sector includes household appliances such as washing machines, fridges, dryers and all kinds of kitchen appliances. High-quality films are often r More details...
Protective films for display screens | Laser cutting
Protection against dust and scratching for electrical and electronic equipment More and more electronic and communication equipment offers users high-quality screen surfaces. No method of protecting More details...
Heat-resistant glass fibres | Laser cutting
Application: Motor sports and tuning In our example, we tested both glass-fibre fabric and approx. 8 mm thick glass-fibre fleece in our CO2 laser systems. The cut contour corresponds to a typical for More details...
Inlays made of parquet | Laser cutting
Stylish floor covering Where the processing of such noble wood is concerned material costs are of course very high. So waste and breakages must be kept to a minimum. What could be better than a proce More details...
Velcro material | Laser cutting
Exact cutting of polyester with CO2 laser Velcro is the ideal alternative when it comes to fixing something quickly and then opening it again. The last few years have seen this material being used in More details...
Polyester designer lamps | Laser cutting
Laser cut lamp made of 30 pieses Cutting out the individual parts of the foil is child’s play thanks to the laser system. Assembly of the lamp is also made easier, because the smooth cut edges are au More details...
Trophies made of PMMA | Laser cutting and engraving
And the award winner receives - acrylic Presenting awards and prizes to winners is usually the highlight of an event. This is true both for small sports clubs as well as for international film award More details...
Coloured acrylic decorations | Laser cutting and engraving
Brightly coloured acrylic glass in the advertising industry We have used a peacock sample cut with laser to illustrate as vividly as possible the abundance of colours offered by acrylic glass. It con More details...
Food and plant materials | Laser cutting and marking
Cutting and labeling of organic material Inscriptions can be applied with breath-taking speed using the CO2 marking system QuickMark. In addition, eurolaser has large-format CO2 laser systems in its More details...
Membrane switches | Laser cutting
eurolaser offers CO2 laser cutters developed especially for plastic foils Membrane switches must always remain operational under special conditions. Durability, soiling and water resistance as well a More details...
Automated sprue removal | Laser cutting
Reduce costs and increase quality On the one hand, automation means reducing the use of personnel and increasing manufacturing quality. On the other, more economic production processes require reliab More details...
Special paper cards | Laser cutting
Individually designed paper cards for special occasions QuickMark laser scanner an outstanding product. So it is the ideal solution for such kinds of applications. Unusual business cards, folded card More details...
Sign made of acrylic and Dibond | Laser cutting and routing
This example shows a combination of laser cutting and routing The base plate of the sign is made from Dibond ®, an aluminium and polyethylene compound. This material is particularly outstanding becau More details...
Model aircraft made of balsa wood | Laser cutting
Light as a feather and ideal for the laser Today, balsa wood is one of the most widely-used materials in the model making branch. Due to its light weight and high degree of mechanical strength, it is More details...
Coat racks out of Multiplex | Laser cutting
Laser cutting of 12 mm Multiplex sheets Always functional – but also quite different. The special argument is the individual design capability and therefore the design of these coat racks. Made from More details...
Teddy bear made of polyester fabric | Laser cutting
Cutting of plush fabric with no fraying The laser beam with its focussed light is the ideal processing method in this case. Contactless processing and the fused cutting edges resulting from the conce More details...
Fleece finishing | Laser engraving
Haptics thanks to laser embossing This technology is particularly advantageous for discreet lettering as the logos, images, letters etc. appear tone-in-tone on the engraved material. That is why colo More details...
Model railways made of plywood | Laser cutting
The world in miniature format The timber framework front of this small riding stable is made of plywood, giving the model railway a particularly realistic appearance. Toy models just do not have the More details...
Door with wooden veneer inlays | Laser cutting
Create your very own living room with laser technology The processing of wood veneer for the manufacture of individual doors is an excellent example of the efficient use of laser technology for inter More details...
Displays for the Point of Sale | Laser engraving
Relief engraving in acrylic Presentation and packaging have in the meantime gained enormously in importance with regard to sales performance. Especially the presentation of the product is an importan More details...
Candle arch made of plywood | Laser cutting
Festive atmosphere created with laser light Christmas time has started and people all over the world are decorating their homes and businesses to give them a festive touch. Windows are filled with c More details...
Fully-automatic production line | Laser cutting
Fully-automatic processing of technical textiles This video shows the fully-automatic processing of technical textiles for the automotive branch. The laser system is fully integrated in the productio More details...
Dieboard production | Laser cutting and marking
Packaging industry Cutting dies for the packing industry and similar sectors can be cut quickly and accurately with laser cutting systems from eurolaser. The most impressive feature of the cutting di More details...
